ANTI COVID NECK WARMER
This "Alternative Anti-Splash Mask" neck warmer has been specifically designed according to the AFNOR guide to meet the demands of the health situation caused by Covid-19. It is a category 1 UNS1 Barrier Mask intended for the general public and exclusively reserved for non-healthcare uses.
The technical characteristics of this product make it possible to protect an entire group wearing these same masks from droplets being projected towards a third party, without however replacing other protective precautions (regular hand washing, physical distancing, reduction of contact with others).
The use of this mask is part of the strict application of measures related to confinement, workplace measures and protective precautions.
In order to optimize the effectiveness of this product, it is recommended that you adjust the mask so that it covers your mouth and nose well. The mask wear time is limited to 4 hours.
Warning: if you are ill, this mask is not suitable. Ask your doctor for advice.
This barrier mask is neither a medical device within the meaning of Regulation EU / 2017/745 (surgical mask), nor personal protective equipment within the meaning of Regulation EU / 2016/425 (as a filtering mask type FFP2 ).
Certificate of conformity supplied with the mask
Composition & Care instructions +
It is advisable to carry out the washing protocol before the first use.
Machine-wash the mask in a net with detergent. Choose a washing programme of at least 30 minutes at a minimum temperature of 60°C. You can put it in the machine with the rest of your washing.
After touching the mask, wash your hands with soap and water or a hydro-alcohol solution.
When the programme is finished, take the mask out and reshape the pleats without using force.
Dry the entire mask (the inner layers must also be completely dry). To do this, you can place the mask in a washing net and use a tumble dryer (making sure to clean the filters of the dryer and wash your hands afterwards), dry it mechanically or air dry your mask on a clean and disinfected surface. The maximum drying temperature should be 60°C.
Iron your mask with steam at a temperature of 120°C (do not iron the elastic straps).
As soon as the mask is dry, store it in clean packaging.
This mask has been tested for 50 washes. After 50 washes, the filtration of the mask is no longer guaranteed.
Store the mask in its original protective packaging in a dry place away from direct sunlight.
Store it in a maximum humidity of 75% and at a temperature between -2°C and +55°C in order to preserve all its protective properties.
Style & Cut +
General public mask Cat 1
- Filtration Mask Guaranteed over 90%
- Filtration efficiency of 3 μm particles:> 90%
- Breathability: air permeability test> 96 L / m².s-1 for a depression of 100 Pa
- Design according to AFNOR SPEC S76-001-2020 and MBS AFNOR SPEC S70-001 guide.
- Material whose performance has been measured by laboratories approved by the DGE. (report RP / 20-3845 / DGA MNRBC / 2000305 / NP VERSION 1) and which supports 10 washes.
- Main raw materials certified OEKO-TEX STANDARD 100 CLASS 1
You may like