CARE INSTRUCTIONS
Fusalp products are the results of years of research and development. To keep your garments looking their best for years to come, we recommend carefully following the instructions on the care label sewn inside each Fusalp piece.
CARE GUIDES
Below are standard recommendations applying to most of our products; they are not, however, a substitute for the care instructions placed on each item.
For more information and how to read the washing symbols indicated on garment care labels, visit the GINETEX website.
Generally, we recommend washing your garments as little as possible to maintain their good condition and make them last longer.
Care instructions for
Always read the care instructions label for exact instructions.
Your ski jacket can be cleaned using your machine wash :
- Prior to washing, close all velcro straps, snaps and zippers.
- Wash the garment by itself.
- Choose a quick wash cycle (30 minutes).
- Use a liquid detergent, without fabric softener or bleach, and pour the correct amount of the cleaner according to the garment weight into the detergent compartment.
Washing instructions:
- Use cold water, maximum 30°C.
- Spin-dry Maximum 900 rpm.
Useful tip:
If your garment features contrasting colors, use an anti-discoloration wipe. Example: Black and white, red and white.
Be careful not to leave your garment in the washing machine for too long after the end of the cycle.
Always read the care instructions label of your jacket for exact drying instructions: tumble drying or air drying.
If tumble drying is suitable:
- Choose the low or medium heat setting (60°C maximum.)
- For puffy jacket such as down/synthetic down-insulated jacket, use a very low heat setting on your dryer and throw in three clean tennis balls to help break up wet clumps.
If air drying is suitable, then hang your jacket to dry.
- We recommend hanging it away from direct sunlight or a direct heat source to prevent discoloration and ensure durability.
Read and follow the care instructions label.
Tumble drying: If the care label allows tumble drying your garment, then we recommend using it to re-waterproof your jacket.
Air drying: Iron your garment with the heat setting on maximum 110°C. Set the iron on no steam and use a thin towel or cloth between the garment and the iron.
Useful tip: Make sure your garment is completely and thoroughly dry before storing it.
Care instructions for
Always read the care instructions label for exact instructions.
Your ski pants can be cleaned using your machine wash :
- Prior to washing, close all velcro straps, snaps and zippers.
- Wash the garment by itself.
- Choose a quick wash cycle (30 minutes).
- Use a liquid detergent, without fabric softener or bleach, and pour the correct amount of the cleaner according to the garment weight into the detergent compartment.
Washing instructions:
- Use cold water, maximum 30°C.
- Spin-dry Maximum 900 rpm.
Useful tip:
If your garment features contrasting colors, use an anti-discoloration wipe. Example: Black and white, red and white.
Be careful not to leave your garment in the washing machine for too long after the end of the cycle.
Always read the care instructions label of your pants for exact drying instructions: tumble drying or air drying.
If tumble drying is suitable:
- Choose the low or medium heat setting (60°C maximum.)
- For puffy pants such as down/synthetic down-insulated pants, use a very low heat setting on your dryer and throw in three clean tennis balls to help break up wet clumps.
If air drying is suitable, then hang your pants to dry.
- We recommend hanging it away from direct sunlight or a direct heat source to prevent discoloration and ensure durability.
Read and follow the care instructions label.
Tumble drying: If the care label allows tumble drying your garment, then we recommend using it to re-waterproof your pants.
Air drying: Iron your garment with the heat setting on maximum 110°C. Set the iron on no steam and use a thin towel or cloth between the garment and the iron.
Useful tip: Make sure your garment is completely and thoroughly dry before storing it.
Care instructions for
Always read the care instructions label for exact instructions.
When it comes to washing a Fusalp wool garment, two options are available: Machine wash or hand wash.
We recommend the use of a detergent designed specifically for woolens.
Machine wash
Choose the « wool », « delicate », or « hand-wash » cycle on the machine, replicating a gentle wash.
Washing instructions:
- Use cold water, maximum 30°C.
- Spin-dry at low speed only. Maximum 500 rpm.
Hand wash
Follow the instructions below :
- Soak the garment in tepid water.
- Swish it around to allow the soap to penetrate the fibers.
- Do not rub the fabric together.
- Let it soak for no longer than 15 minutes.
- Gently rinse the garment without wringing, rubbing or twisting.
Useful tip: Adding a few drops distilled vinegar in your last rinse water will prevent pilling, eliminate odors, and leave your clothes fluffy and soft.
Gently press or squeeze out as much water as you can without wringing, rubbing or twisting.
Useful tip: Roll garment in a dry towel, then gently press to remove excess moisture. Repeat as necessary.
Lay garment flat to dry on a fresh towel or mesh rack.
Do not use a TUMBLE DRYER, even on cold setting.
Care instructions for
Always read the care instructions label for exact instructions.
When it comes to washing a Fusalp synthetic knit such as viscose, two options are available: Machine wash or hand wash.
Machine wash
Choose the « wool », « delicate », or « hand-wash » cycle on the machine, replicating a gentle wash.
Washing instructions:
- Use cold water, maximum 30°C.
- Spin-dry at low speed only. Maximum 500 rpm.
Hand wash
Follow the instructions below :
- Soak the garment in tepid water.
- Swish it around to allow the soap to penetrate the fibers.
- Do not rub the fabric together.
- Let it soak for no longer than 15 minutes.
- Gently rinse the garment without wringing, rubbing or twisting.
Useful tip: Adding a few drops distilled vinegar in your last rinse water will prevent pilling, eliminate odors, and leave your clothes fluffy and soft.
Gently press or squeeze out as much water as you can without wringing, rubbing or twisting.
Useful tip: Roll garment in a dry towel, then gently press to remove excess moisture. Repeat as necessary.
Lay garment flat to dry on a fresh towel or mesh rack.
Do not use a TUMBLE DRYER, even on cold setting.
Care instructions for
The leather we use is from natural origins and will acquire a patina over time.
Before stepping in the snow, let alone salt, we recommend that you waterproof your shoes, carefully avoiding contact with rubber inlays, and reapply as needed.
Before cleaning your shoes, remove the shoelaces and insert shoe trees or stuff your shoes with newspaper so they hold their shape.
Let the shoes dry in a well-ventilated area, removing any liners or insoles.
Avoid repeated or prolonged contact with raw denim pants to prevent color bleeding and transfer.
Useful tip: Keep your shoes clean. Avoid salt stains that can detrimentally affect the leather.
- CLEANING: Brush away any dirt or debris from the surface using a soft brush or cloth.
- CONDITIONING: Use a high-quality leather conditioner, applying it sparingly with a soft cloth and let dry. Wipe the excess off with a fresh, lint-free cloth.
- PROTECTION: Holding the shoes 15cm away from the bottle, evenly spray the entire surface with a waterproofing spray. Allow the shoes to dry.
- CLEANING: Brush away any dirt or debris from the surface using a special cleaning brush/sponge for suede shoes. Use a magic gum for dry cleaning the shoe exterior and removing stubborn stains.
- PROTECTION: Holding the shoes 15cm away from the bottle, evenly spray the entire surface with a waterproofing spray. Allow the shoes to dry.
- CLEANING & CONDITIONING: Brush with a mild laundry detergent, rinse off, and allow the shoes to air dry completely.
Care instructions for
Fur hoods and collars are most often removable and should be removed before washing.
Instructions :
- Machine wash 30° then air dry (Tumble dry low heat, 60°C maximum).
- After drying, comb the fibers to give it all its splendor back.
Useful tip: You can also handwash the fur with shampoo and then blow dry.
Fur hoods and collars are most often removable and should be removed before washing.
Instructions :
- Rely on a reputable furrier.
- DIY : Sprinkle sawdust over the major spots, and let it rest. The sawdust will absorb the filth, which you can then vacuum up. Shake if off first, then brush, vacuum up, and brush again to give it all its splendor back.
Useful tip: You can also handwash the fur with shampoo and then blow dry.
Care instructions for
To wash your swimwear, follow the instructions below:
- Use cool wather, maximum 30°C
- Wash before use
- Wash inside-out
- Wash with an anti-discoloration wipe
Should you have any questions, please contact us through Customer Service so we can help. Click the « Help » button at the bottom right, then click « After Sales Service Request », and follow the instructions to complete the form. Our team will get back to you as soon as possible.